1. It should be strictly applied in accordance with the working pressure and operating temperature of the reactor calibrated on the factory nameplate to prevent risk.

2. Strictly implement the requirements in the reactor manual on refrigeration, oil dripping and other aspects, and do a good job in the maintenance and maintenance of machinery and equipment.

3. When all the gate valves of the reactor are applied, the valve seat (needle) should be rotated slowly, and the cover cannot be separated, so as to achieve the practical effect of tightness. It is not easy to use too much force when shutting down to prevent damage to the protruding surface.

4. The electrical control system instrument panel should be operated by full-time personnel and set over-voltage protection equipment in accordance with regulations.

Maintenance reactor should always pay attention to the working condition of the entire machine equipment and reducer. The reducer grease should be filled first. The electric heater material oil should be removed and replaced in half a year. Valves, barometers, thermometers, water vapor distillation holes, electric heating rods, appliance dashboards, etc. should be maintained regularly. If there are common faults, replace or repair them in a timely manner. When the equipment is not needed, be sure to use warm boiling water on the inner and outer walls of the vessel. Clean up, often clean the pot body, keep the surface clean and bright inside, so as to achieve durable purpose.

And Shaanxi Rite key supply stainless steel reactor and steel lined fluorine reactor.

(1) Characteristics of stainless steel plate reaction kettle

1. Excellent corrosion resistance;

2. The actual effect of heat conduction is better than that of Tang Porcelain Reactor;

3. The metal material has high-quality mechanical equipment performance, can bear higher working pressure, and can also bear the impact of small solid raw materials when feeding;

4, has excellent production and processing performance, according to processing technology regulations, can be made into a variety of different looks and structure of the reaction kettle. The wall of the kettle can be polished to prevent it from hanging and facilitate cleaning.

(2) Characteristics of steel-lined fluorine reactor:

Steel-lined fluorine reactors are commonly selected by companies such as Hyundai Engineering. It is a general carbon steel reaction kettle as a conventional, lined with PFA (soluble polytetrafluoroethylene), PTFE (polytetrafluoroethylene), F40 (ETFE), PO (propylene oxide) with high organic chemical reliability. , PP (polypropylene) and other plastics, formed by rolling or spray painting. The upper lining raw materials can also be used for lining of large and medium-sized chemical machinery and equipment such as storage tanks, shell and tube heat exchanger casings.

1. High-quality mechanical equipment performance: It has the performance advantages of metal materials and can bear higher working pressure;

2. Good high temperature resistance: wide range of operating temperature (-80 ~ 200 ℃);

3, strong corrosion resistance: almost does not react with all strong acids and bases;

4. Heat transfer is easy to use: Compared with other reaction kettles, the heating and cooling rates are faster;

5, excellent production and processing performance: according to processing technology regulations, can be made into a variety of different looks and structure of the reaction kettle. The wall of the kettle can be polished to prevent it from hanging and facilitate cleaning. The lining can be selected at will according to the working conditions of the application.